KlattGrid: Play special...

A command to play part of a KlattGrid.


Time range (s)
determines the part of the sound's domain that you want to hear. If both argument equal zero the complete sound is played.
Sampling frequency (Hz)
determines the sampling frequency of the resulting sound.
Scale peak
determines whether the peak value of the sound will be set to 0.99. In this way the sound will always play well.
Sampling frequency (Hz)
the sampling frequency of the resulting sound.
switches voicing on or off.
switches the flutter tier on or off. This will, of course, only have effect if at least one flutter point has been defined in the flutter tier.
Double pulsing
switches the double pulsing tier on or off.
Collision phase
switches the collision phase tier on or off.
Spectral tilt
switches the spectral tilt tier on or off.
Flow function
determines which flow function will be used. The flow function is determined by two parameters, power1 and power2 as flow(t)=xpower1-xpower2. If the option "Powers in tier" is chosen the power1 and power2 tiers will be used for the values of power1 and power2. The other choices switch the two tiers off and instead fixed values will be used for power1 and power2.
Flow derivative
determines whether the flow or the flow derivative is used for phonation.
determines whether aspiration is included in the synthesis.
determines whether breathiness is included in the synthesis.
switches on either the cascade or the parallel section of the synthesizer.
Oral formant range, Nasal formant range ...
selects the formants to use in the synthesis. Choosing the end of a range smaller than the start of the range switches off the formants.
Frication bypass
switches the frication bypass of the frication section on or off. The complete frication section can be turned off by also switching off the frication formants.

© djmw, April 21, 2009